FA50 Room Sanitiser

Introduction

It is designed specifically for use in small spaces. It is made in a compact size which makes it portable. This product makes it possible to have a chemical free operation. It has an easy application and very quiet. This unit is maintenance free.

How to use

1. Connect the device to the mains. Turn the controller right (clockwise) and you will then hear a “click” a blue light for operational control and the production of ozone will begin.
2. As you turn the regulator wheel further to the right, ozone production will reach its maximum.
3. To stop the production of ozone, turn to the left (counter clockwise) until you hear a “click” which stops the production of ozone and switches the blue light off.
4. We recommend that you disconnect the device from your electrical supply and store it in a dry place when not in use for extended periods.

Warning- do not cover when on and keep away from any sources of heat.

Maintenance

FA50 is almost maintenance free. Once every month the air inlet and outlet should be vacuumed cleaned. Disconnect the unit and using an accessory brush attached to a vacuum cleaner running on its lowest power setting, gently brush back and forth over the opening to help remove internal and external contamination. Do not apply the vacuum cleaner for more than 10 seconds at a time or blow air into the unit. Periodically wipe the unit over with a damp cloth. Do not spray with cleaning products or allow mist or other types of moisture to enter the unit. Cleaning products or moisture will damage the unit and this is not covered by the product warranty.